Products are being updated on a daily basisapoligies fo the inconvience!
Intelligent Controllers for solar Hot Water
SR868C8/Q
System Controller for Separated Pressurized Solar System
Addition features for
Q model:
Thermal Measuring
Pump speed adjusting
SR988C
System Controller for Separated Pressurized Solar System
Handles up to 50 different Solar Configurations
Plug and go Working stations
SR961/2
Single Pipe Solar Station
For simple instalation which includes controller, pump & valves
ST WS-ll
Single Pipe Solar Work Station
For simple instalation right out of the box
Size: 476*285*158mm
Includes:
WILO pump RS-15/6 or RS-25/6 (AC 110V/220V, 93W)
Temperature and pressure guage (1.0MPa, 120℃)
Filling valve with flow meter (4-16 L/min)
ST WS-II is a combined circulation unit for solar applications.
On the right hand side, the pump will supply from the storage tank to the solar collector, and the left hand pipe is the return from the collector to the tank coil.
•No filling pump needed, Using the working station simplifies the installation on filling medium liquid. The circulation pump will allow one man to fill the system.
•Multifunctional ball valve to simplify the system filling.
•Install the collector and the cylinder separately.
•Preset the flow rate.
•Air stop device , manual integrated vent.
•Can work conjunction with any controller.
•Safety operation, excellent performance, Maintenance free.
SA03021 (110V)
Single Pipe Solar Work Station
For simple instalation which includes pump & valves
Size: 395*170*145mm
Includes:
WILO pump RS-15/6 (AC 110V/220V, 93W)
Temperature and pressure guage (1.0MPa, 120℃)
Filling valve with flow meter (2-8 L/min)
Safty Valve
Collectors
Collector SCM Models (Evacuated Tubes)
SCM models come in 12, 15 or 20 tubes for customization
Tube Specification
Tubes
Absorber Area
L/W(mm)
Vol(L)
Φ58mm*1800mm
12
1.55M²
1420*1010
.8
Φ58mm*1800mm
15
1.95M²
1420*1235
1
Φ58mm*1800mm
20
2.60M²
1420*1610
1.37
Collectors
Collector TZ58 Models (Evacuated Tubes)
TZ58 models come in 30 tubes for customization
Tube Specification
Tubes
Absorber Area
L/W(mm)
Vol(L)
Φ58mm*1800mm
30
2.99M²
2022*2655
2.3
Collectors
Collector TH 32 Models (Flat Panel)
Absorber Area
L/W(mm)
Vol(L)
2.87M²
2475*1200
2.3
Collectors
Collector EW 32 Models (Flat Panel)
Absorber Area
L/W(mm)
Vol(L)
2.874M²
2438*1219
2.3
Insulated Pipe
Stainless Steet Insulated Solar Piping with sensor wire
1/2' (15mm) and 3/4' (18mm)
Currently only available in single (30M & 50M lenghts) Insulation:
Material: Synthetic Elastomer (EPDM based) with a complete closed-cell structure (20mm).
Temperature range: from -50oC+175oC Pipe:
Flexible Stainless Steet (SUS304)
DN 15 & DN 20
Temperature Sensor Wire is included
Fittings:
Brass union nuts and double nipples
Heat Exchangers
Heat Exchanger Features
Constructed with corrugated tubes for optimal
efficiency
Less expensive, more durable, and easier to
install
than brazed plateheat exchangers
Designed to perform at high fluid velocities with
low pressure drops
Complete welded construction ensuring strength
and durability
Due to high flow rates through the exchanger,
it is inherently self cleaning
